- No products in the cart.
Tool Holders
Frequently Asked Questions
1. What are ER collet Holders?
ER collet holders are the tool holders used in machining operations to provide tight grip on the workpiece in place to avoid vibrations and wobbling. ER collet holders are used in CNC machines, milling machines, drilling, and lathes to hold ER collet and cutting tools and provide minimal runout machining operations.
2. How do I properly install an ER collet into a holder?
To properly install ER collet, clean the collet deeply before using, then align the collet’s groove with the circular ring inside the collet nut then firmly attach into the place, then thread the collet nut onto the holder without overly tightening. Then insert the tool and tighten the nut to securely clamp it.
3. What are the ER collet holders series available at Accu-fix precision tools?
There are various series available at Accu-fix precision tools which are ER11, ER11M, ER16, ER16M, ER20, ER25, ER32, ER40. If you want to purchase our ER collet holders please contact us on +91 9099600730, +91 7567975718 or you can email us on store@accufixtools.com or sales@accufixtools.com for more details.
4. What are the differences between ER collet holders and side lock end mill holders?
There are few common differences between ER collet holders and side lock end mill holders:
Difference between their grip — ER collet holders use friction to hold tool while operations while side lock end mill holders use screw to tighten against the flat surface of cutting tool.
Another difference is good for general operations like light cuts and small batch work.
And lastly, ER collet holders could suffer from vibrations, poor tool life and pull-outs. Can only hold one size shank and they are not tool breakage friendly.
Difference between their grip — ER collet holders use friction to hold tool while operations while side lock end mill holders use screw to tighten against the flat surface of cutting tool.
Another difference is good for general operations like light cuts and small batch work.
And lastly, ER collet holders could suffer from vibrations, poor tool life and pull-outs. Can only hold one size shank and they are not tool breakage friendly.
5. How can I buy ER collet holders from Accu-fix precision tools?
If You want to buy ER collet holders from our company you can call us on +91 9099600730, +91 7567975718 or you can visit our company for more specific information about products you need for your machining operations.
Quick Link
- Tool Holders
- ER Collet Holder
- ER Collet Holders-CAT Taper
- ER Collet Holders-CAT(DCAT) Dual-contact
- ER Collet Holders-BT Taper
- ER Collet Holders-BT(DBT) Dual-contact
- ER Collet Holders-HSK Taper
- ER Collet Holder - HSK Coolant Tube
- End Mill Holders
- End Mill Holders - CAT Taper
- End Mill Holders-CAT(DCAT)Dual-contact
- End Mill Holders-BT Taper
- End Mill Holder-BT(DBT)Dual-contact
- End Mill Holder-HSK Taper
- End Mill Holders-Set Screw And HSK Coolant Tube
- Shrink Fit Holders
- Shrink Fit Holder-CAT Taper
- Shrink Fit Holder-CAT(DCAT)Dual-contact
- Shrink Fit Holder - BT Taper
- Shrink Fit Holder - HSK Taper
- Face Mill Holders
- Face Mill Holders-CAT Taper
- Face Mill Holders-CAT(DCAT)Dual-contact
- Face Mill Holders-BT Taper
- Face Mill Holders-BT(DBT)Dual-contact
- Face Mill Holders-HSK Taper
- Face Mill Holders-Lock Screw and HSK Coolant tube
- Hydraulic Holders
- Hydraulic Holders-CAT Taper
- Hydraulic Holders-BT Taper
- Hydraulic Holders-HSK Taper
- Power Milling Holders
- Power Milling Holders-CAT Taper
- Power Milling Holders-CAT(DCAT)Dual-contact
- Power Milling Holders-BT Taper
- Power Milling Holders-BT(DBT)Dual-contact
- Power Milling Holders-HSK Taper
- Quick Change Tapping Holders
- Quick Change Tapping Holders-CAT Taper
- Quick Change Tapping Holders-BT Holder
- Quick Change Tapping Holders-HSK Taper
- ER Straight Shank Holders
- ER Straight Shank Holders-Single Ended
- ER Straight Shank Holders-Double Ended
- Collets
- ER Collets
- ER Steel Sealed Collets
- ER External Coolan Collet(Jet Spray)
- ER Tap Collets
- ER Tap Steel Sealed Collets
- ER Floating Tap Collet
- DNA(Dead Nuts Accurate) Collets
- SK Collets
- DA Collets
- DA Sealed Collets
- TG Collets
- TG Sealed Collets
- TG Tap Collets
- OZ(EOC) Collets
- Straight Collets for Milling Chuks
- Quick Change Tapping Adapters(Collets)
- R8 Collets
- 5C Collets
- 16C Collets
- 3J Collets
- Tool Holders Bushings
- Type-C Bushings
- Type-CS Bushings
- Type-Z Bushings
- Type-J Bushings
- Type-B Bushings
- Boring Bar Sleeves
- Retention Knobs
- CAT Retention Knobs
- BT Retention Knobs
- CNC Live/Dead Centers
- CNC Heavy Duty Live Centers
- Interchangeble Heavy Duty Centers
- CNC Small Casing Centers
- Slimline Medium Duty CNC Live Centers
- Dead Centers
- Other Accessories
- ER Nut
- ER Wrench
- Tool Locking Device
- Spindle Wiper
- HSK Coolant Tube
