A CNC tooling order can look correct on a purchase order and still be wrong for the machine. The taper may fit a different spindle. The collet may have the wrong bore. The holder may reach the feature but leave too much tool projection.
When comparing a tooling shop, start with the complete setup: machine, holder, collet, cutting tool and operation. Then compare the price of the correct combination.
PAC Tools USA’s CNC tooling catalog includes holders, collets, bushings, retention knobs and accessories. This guide explains what to compare before ordering and where to find the relevant product ranges.
What is a CNC tooling shop?
A CNC tooling shop supplies components used to hold, locate or support tools and workpieces during machining. Its range may include collets, tool holders, retention knobs, sleeves and setup accessories.
That is different from a machine shop that produces finished components. If you need milling or turning services, ask for machining capability. If you need replacement tooling for your own machines, compare the supplier’s catalog, drawings and application information.
CNC tooling products to compare at PAC Tools USA
1. ER collets: match the series and actual shank diameter
ER collets and precision collet sets provide a replaceable clamping element inside a compatible ER holder. PAC lists ER8 through ER50 series, with inch and metric options where available.
Do not select a collet by the cutter’s cutting diameter alone. The dimension that matters for clamping is the shank.
Before buying, compare:
- ER series and compatible nut/holder.
- Nominal bore and permitted clamping range.
- Inch or metric tool-shank dimensions.
- Precision grade and the conditions used to specify accuracy.
- Individual replacement collets versus a set for recurring setups.
Example:PAC item 200002, ER8-1.0 mm collet is listed with a 1 mm bore and standard precision below 15 microns. It illustrates why an item number and bore size are more useful than an order simply saying “small ER collet.” Check the current product page for availability and final specification.
2. ER collet holders: start at the spindle interface
ER collet holders connect the collet assembly to the machine. PAC’s collection groups include BT, CAT and HSK interfaces, with dual-contact categories also listed.
The taper, ER series and projection length all need to match the job. Two holders using the same ER collet can still have very different spindle interfaces or reach.
Include these details in your enquiry:
- Exact machine interface and taper size.
- ER series and cutting-tool shank diameter.
- Required projection and access clearance.
- Coolant route required by the operation.
- Application RPM and the selected assembly’s rated limits.
3. End mill holders: specify the bore, reach and retention method
End mill holders are another option for compatible milling setups. Set-screw designs must match the intended tool-shank arrangement.
When comparing holders, ask:
- Does the bore match the end mill shank?
- Is the tool designed for the selected retention method?
- Will the gauge length provide access without unnecessary overhang?
- Does the specific SKU provide the coolant arrangement required?
Do not assume that one holder style is best for every roughing and finishing operation. Choose around the machine, cutter and machining conditions.
4. Hydraulic and shrink-fit holders: compare the setup requirements
PAC lists bothhydraulic holders andshrink-fit holders.
These are different clamping systems, so compare the complete setup rather than treating them as interchangeable upgrades.
- Confirm the permitted shank size and tolerance.
- Review holder dimensions against the available working space.
- Check the required assembly equipment and procedure.
- Match the chosen holder to the intended operation and spindle interface.
For a new holder system, ask for the relevant product drawing and instructions before changing your shop’s setup process.
5. Face mill holders: check the cutter connection
Face mill holders connect compatible face mills to the spindle. The cutter-side connection needs as much attention as the machine-side taper.
Specify:
- Cutter bore or pilot requirement.
- Drive arrangement and mounting details.
- Projection and cutter clearance.
- Machine taper and intended application.
Send the cutter drawing or exact model when requesting a recommendation.
6. Retention knobs: identify the exact design
Retention knobs must match the machine’s specified drawbar and holder arrangement. A similar appearance is not sufficient to establish compatibility.
Give the supplier the existing part number or a dimensional drawing. Confirm the thread, head geometry, dimensions and coolant configuration. Follow the machine builder’s specification rather than choosing by taper family alone.
7. Boring bar sleeves and bushings: order by dimensions
Boring bar sleeves adapt compatible tooling arrangements. An accurate order should identify both the outer interface and the bore receiving the bar.
Useful purchase details include:
- Outside diameter and inside diameter.
- Overall length and flange dimensions.
- Clamping arrangement.
- Coolant requirements.
- Existing sleeve identification or a marked-up drawing.
8. Tapping adapters and supporting accessories
Quick-change tapping adapters and collets should be chosen around the compatible tapping system and tap dimensions.
Do not order only by thread size. Include tap shank diameter, square dimensions where applicable, adapter interface and holder identification. Use the main catalog to complete the order with the required accessories.
A practical checklist for comparing tooling shops
| Purchase question | What to provide | Why it matters |
|---|---|---|
| Which machine is this for? | Manufacturer, model and spindle interface | Establishes the correct machine connection |
| What tool will it hold? | Shank diameter, units and tool identification | Avoids ordering by cutting diameter alone |
| What operation will it perform? | Milling, drilling, tapping or boring | Helps assess the clamping arrangement |
| What reach is required? | Projection and access restrictions | Prevents unnecessary overhang |
| What performance is needed? | Application RPM, accuracy requirement and coolant arrangement | Keeps the enquiry specific |
| How will it be reordered? | SKU, quantity and delivery ZIP code | Makes repeat purchasing more reliable |
Keep one approved setup record per recurring job. Record the holder, collet, nut and cutting tool together. That gives purchasing a repeatable specification instead of a collection of similar-looking parts.
Looking for tooling shops near Chicago or elsewhere in the USA?
PAC Tools USA lists its contact address at 309 Lively Blvd, Elk Grove Village, Illinois 60007.
For buyers searching for CNC tooling shops around Chicago and Elk Grove Village, that provides a clear location for a supplier enquiry. Confirm arrangements with PAC before planning a visit or collection.
For online sourcing from Detroit, Milwaukee, Cleveland, Indianapolis, Houston, Dallas–Fort Worth, Los Angeles or other US locations, include the delivery ZIP code with the tooling list. Request current availability, freight options and delivery estimates for the specific order.
Location helps with logistics. It does not replace the specification check that makes the tooling suitable for your machine.
Send a tooling enquiry that can be quoted accurately
Use this format:
An enquiry such as “CAT40 end mill holder for a specified shank diameter and projection” is more actionable than “send your best CNC holder price.”
Contact PAC Tools USA with your specification, or browse the tooling catalog to identify the relevant range.
Frequently asked questions
What does a CNC tooling shop sell?
A CNC tooling shop may sell tool holders, collets, retention knobs, sleeves and setup accessories. Check the supplier’s product catalog to confirm the exact range and compatibility with your machines.
Is a tooling shop the same as a CNC machine shop?
Not necessarily. A tooling supplier sells tooling components, while a CNC machine shop typically makes parts through machining operations. Confirm whether you need tooling supply or a finished-part manufacturing service.
How do I choose an ER collet?
Match the ER series, tool-shank diameter, permitted clamping range and accuracy requirement. The holder, collet and nut must be compatible. Follow the selected manufacturer’s assembly instructions.
Does PAC Tools USA list inch and metric ER collets?
PAC’s ER collet collection lists inch and metric options where available. Check the individual item number, bore, precision grade and stock status before placing an order.
Can I buy tooling from PAC if my shop is outside Illinois?
PAC’s product shipping information lists US domestic shipping. Enter your destination at checkout or contact the team to confirm availability, freight and delivery timing for your order.
What information should I send for a tooling quotation?
Send the machine interface, product type, item number or drawing, shank/bore dimensions, required projection, quantity and delivery ZIP code. Include coolant and application requirements when relevant.
Let’s Find the Right Tooling for Your Job!
Tell us about your CNC application, machine setup, or tooling requirement. Our team can help you identify the right solution for your machining needs.
About the Author: Scott Shippell
ISO 9001:2015 Certified CNC Tooling ExpertThis content is authored and reviewed by the technical engineering team at PAC Precision Tools USA. With over 20 years of experience in custom tooling manufacture, high-performance ER collets, shrink-fit systems, and hydraulic tool holders, our team provides certified expertise and adherence to precision engineering guidelines.
