- No products in the cart.
613059 | CAT DUAL-CONTACT TAPER | ER COLLET HOLDERS
$180.00
Chicago, USA Stock -
Canada Stock -
DCAT50-ER40-6"-CF Dual-Contact Cool-Flange ER Collet Holder
Specification
- ProjectLength - 6"
- Series - ER40
- Taper - DCAT50
Description
DCAT50-ER40-6"-CF Dual-Contact Cool-Flange ER Collet Holder
Frequently Asked Questions
1. What is a CAT Dual-Contact ER Collet Holder?
A CAT dual-contact ER holder is an advanced tool that ensures contact between the taper and face of the spindle, providing greater rigidity and improved machining accuracy
2. What are the main advantages of dual-contact technology?
Dual-contact holders reduce tool deflection, enhance surface finish, and provide longer tool life- especially in high-speed and heavy-duty machining environments.
3. Are CAT Dual-Contact holders compatible with standard CAT spindles?
They are specifically designed for machines equipped with dual-contact spindles but can also operate in standard CAT tapers, offering flexibility. Always verify your spindle’s compatibility before installation.
4. How does a CAT Dual-Contact ER Holder improve performance?
The contact of the face and taper minimizes vibration and increases tool stability, resulting in better precision and an extended spindle life.
5. Can I use the same pull stud as standard CAT holders?
Dual-contact holders may require the specific pull studs designed for dual-face contact. Always check the recommended pull stud specification.
6. Are these holders suitable for high-speed applications?
Yes, they are dynamically balanced for high-speed machining, offering consistent results even in demanding production runs.
7. How should I care for PACTools CAT Dual-Contact ER Holders?
You should clean both the taper and face surfaces before use and ensure proper torque tightening to maintain full contact accuracy. Any debris may affect contact precision, so make sure to clean oil, dirt, or chips.
Quick Link
- Tool Holders
- ER Collet Holder
- ER Collet Holders-CAT Taper
- ER Collet Holders-CAT(DCAT) Dual-contact
- ER Collet Holders-BT Taper
- ER Collet Holders-BT(DBT) Dual-contact
- ER Collet Holders-HSK Taper
- ER Collet Holder - HSK Coolant Tube
- End Mill Holders
- End Mill Holders - CAT Taper
- End Mill Holders-CAT(DCAT)Dual-contact
- End Mill Holders-BT Taper
- End Mill Holder-BT(DBT)Dual-contact
- End Mill Holder-HSK Taper
- End Mill Holders-Set Screw And HSK Coolant Tube
- Shrink Fit Holders
- Shrink Fit Holder-CAT Taper
- Shrink Fit Holder-CAT(DCAT)Dual-contact
- Shrink Fit Holder - BT Taper
- Shrink Fit Holder - HSK Taper
- Face Mill Holders
- Face Mill Holders-CAT Taper
- Face Mill Holders-CAT(DCAT)Dual-contact
- Face Mill Holders-BT Taper
- Face Mill Holders-BT(DBT)Dual-contact
- Face Mill Holders-HSK Taper
- Face Mill Holders-Lock Screw and HSK Coolant tube
- Hydraulic Holders
- Hydraulic Holders-CAT Taper
- Hydraulic Holders-BT Taper
- Hydraulic Holders-HSK Taper
- Power Milling Holders
- Power Milling Holders-CAT Taper
- Power Milling Holders-CAT(DCAT)Dual-contact
- Power Milling Holders-BT Taper
- Power Milling Holders-BT(DBT)Dual-contact
- Power Milling Holders-HSK Taper
- Quick Change Tapping Holders
- Quick Change Tapping Holders-CAT Taper
- Quick Change Tapping Holders-BT Holder
- Quick Change Tapping Holders-HSK Taper
- ER Straight Shank Holders
- ER Straight Shank Holders-Single Ended
- ER Straight Shank Holders-Double Ended
- Collets
- ER Collets
- ER Steel Sealed Collets
- ER External Coolan Collet(Jet Spray)
- ER Tap Collets
- ER Tap Steel Sealed Collets
- ER Floating Tap Collet
- DNA(Dead Nuts Accurate) Collets
- SK Collets
- DA Collets
- DA Sealed Collets
- TG Collets
- TG Sealed Collets
- TG Tap Collets
- OZ(EOC) Collets
- Straight Collets for Milling Chuks
- Quick Change Tapping Adapters(Collets)
- R8 Collets
- 5C Collets
- 16C Collets
- 3J Collets
- Tool Holders Bushings
- Type-C Bushings
- Type-CS Bushings
- Type-Z Bushings
- Type-J Bushings
- Type-B Bushings
- Boring Bar Sleeves
- Retention Knobs
- CAT Retention Knobs
- BT Retention Knobs
- CNC Live/Dead Centers
- CNC Heavy Duty Live Centers
- Interchangeble Heavy Duty Centers
- CNC Small Casing Centers
- Slimline Medium Duty CNC Live Centers
- Dead Centers
- Other Accessories
- ER Nut
- ER Wrench
- Tool Locking Device
- Spindle Wiper
- HSK Coolant Tube
