How tight is the grip of a shrink fit holder compared to other tool holders?

PAC Tools Shink fit holders offer an exceptionally tight grip with minimal runout, outperforming traditional collet or end mill holders. This ensures greater precision and rigidity, making PACTools ideal for high-performance machining applications.

Is there a risk of damaging the tool shank due to heat?

Yes, excessive heat during machining or improper shrink-fit procedures can potentially damage the tool shank. PACTools recommends using proper cooling and fitting techniques to avoid thermal stress on the tool.

What happens if I use an undersized tool shank?

Using an undersized tool shank can lead to poor clamping, tool slippage, and reduced machining accuracy. PACTools advises using properly sized shanks to ensure secure fit and optimal performance.

How do I know if the tool is fully inserted during the shrink process?

During the shrink process, PAC Tools recommends marking the tool shank beforehand. Once inserted, the mark should align with the holder’s face to confirm full and proper insertion.

How do I remove a stuck tool from a shrink fit holder?

To remove a stuck tool, reheat the PACTools shrink fit holder using an induction heater. The holder expands thermally, allowing safe and easy removal of the tool without force or damage.

Are shrink fit holders balanced for high RPM use?

Yes, Shrink fit holders from PACTools are precisely balanced for high-speed applications, typically up to 25,000 RPM or more, ensuring smooth operation and reduced vibration in high-performance machining operations. For more information contact us at +1 262-282-2456 or email us at sales@pactoolsusa.com.

Start typing to see products you are looking for.

0 item(s) / $0.00

Cool-Blast And Cool-Flange Supplier & Distributor in USA

16C COLLETS

3J COLLETS

5C COLLETS

Accessories - Lock Screrw And HSK Coolent Tube

AF Collets

BORING BAR SLEEVES

BT DUAL-CONTACT

BT DUAL-CONTACT TAPER

BT RETENTION KNOBS

BT TAPER

BT taper

BT TAPER

CAT DUAL-CONTACT TAPER

CAT RETENTION KNOBS

CAT TAPER

CAT TAPER - COOL-BLAST / Cool-Flange Holder

CNC HEAVY DUTY MODEL

CNC LIVE/DEAD CENTERS

CNC SLIMLINE MODEL

CNC SMALL CASING MODEL

COLLETS

DA COLLETS

DA SEALED COLLETS

DEAD CENTERS

DNA (Dead Nut Accurate) Collets

DOUBLE ENDED HOLDERS

DUAL CAT TAPER - COOL-BLAST / Cool-Flange Holder

END MILL HOLDERS

End Mill Holders - SET SCREW

ER COLLET HOLDERS

ER COLLETS

ER FLOATING TAP COLLETS

ER JET SPRAY COOLANT COLLETS

ER NUT

ER Quick Change Tap Collets

ER STEEL SEALED COLLETS

ER STRAIGHT SHANK HOLDERS

ER TAP COLLETS

ER TAP STEEL SEALED COLLETS

ER WRENCH

FACE MILL HOLDERS

HSK COOLANT TUBE

HSK TAPER

HSK TAPER - COOL-BLAST / Cool-Flange Holder

HYDRAULIC HOLDERS

INTERCHANGEABLE CNC HEAVY DUTY MODEL

OTHER ACCESSORIES

OZ (EOC) Collets

POWER MILLING HOLDERS

QUICK CHANGE TAPPING ADAPTERS

QUICK CHANGE TAPPING HOLDERS

R8 COLLETS

Reduction Sleeves For Hydralic Chuck

RETENTION KNOBS

Screw In Type Milling Cutter

Shrink Fit Extension

SHRINK FIT HOLDERS

SHRINK FIT HOLDERS - COOL-BLAST AND COOL-FLANGE

SINGLE ENDED HOLDERS

SK COLLETS (SUPER COLLETS)

SPINDLE WIPER

STRAIGHT COLLETS FOR MILLING CHUCKS

Straight Shank Tap Holder

TG COLLETS

TG SEALED COLLETS

TG TAP COLLETS

TOOL HOLDER BUSHINGS

TOOL HOLDERS

TOOL LOCKING DEVICE

TYPE-B BUSHINGS

Type-C Bushings

TYPE-CS BUSHINGS

TYPE-J BUSHINGS

TYPE-Z BUSHINGS

Frequently Asked Questions

1. What are Cool-Blast and Cool-Flange Shrink Fit Holders? ▼

Cool-Blast and Cool-Flange Shrink Fit Holders are advanced tool holders designed to deliver coolant directly to the cutting edge through special coolant channels. This improves heat control, chip removal, and tool life. As a precision tools supplier in the USA, PAC Precision Tools offers high-quality cooling-enabled holders for demanding machining.

2. Why are Cool-Blast and Cool-Flange features important? ▼

These features help reduce heat buildup, which improves machining accuracy and prevents tool wear. Better cooling also allows for higher cutting speeds and improved surface finishes, making them ideal for high-performance CNC applications.

3. Are these holders suitable for high-speed machining? ▼

Yes, Cool-Blast and Cool-Flange Shrink Fit Holders are fully balanced for high-speed operations. Their cooling channels help maintain stable temperatures even during long, continuous cuts, ensuring consistent machining quality.

4. How do Cool-Blast channels work? ▼

Cool-Blast channels deliver coolant from inside the holder directly to the cutting area. This targeted cooling enhances chip evacuation, reduces tool stress, and improves tool life compared to external coolant alone.

5. What tools are compatible with these holders? ▼

They work with standard shrink-fit-compatible carbide tools with h6 shank tolerances. Different bore sizes are available to suit various cutting tools commonly used in CNC machines.

6. How do I maintain Cool-Blast or Cool-Flange holders? ▼

Clean coolant channels regularly, ensure the bore is debris-free, and avoid overheating during installation. Proper maintenance keeps coolant flow strong and protects the holder from internal corrosion.

7. Need help choosing the right Cool-Blast or Cool-Flange holder? ▼

If you need more information and guidance in choosing the right Cool-Blast or Cool-Flange holder for your machining operations, you can contact us here +1 262-282-2456 or email us at sales@pactoolsusa.com. PAC Precision Tools USA is a trusted CNC tools distributor in the USA.

Quick Link

Cool-Blast And Cool-Flange Supplier & Distributor in USA

Frequently Asked Questions

Quick Link

Stay Updated with Us!

#title#

Features
Availability:
Price
Options
Actions